Flowserve Circpac HP Uživatelský manuál stáhnout pdf

Installation

Instructions

Circpac HP

Experience In Motion

Segmented Circumferential Gas Seal for Gas Compressors

1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Instructions

Installation InstructionsCircpac HPExperience In MotionSegmented Circumferential Gas Seal for Gas Compressors

Strany 2 - 2 Brief Description

21 Precautions 1.1 Please read these instructions carefully. Installation in accordance with the following instructions will contribute to l

Strany 3 - 3 Equipment Check

3 2.5.3 Minimum runout between the shaft and equipment housing. 2.5.4 Prevention of product sedimentation on the housing, shaft or

Strany 4 - 4 Seal Installation

3.11 Seal chamber squareness to the shaft center line should be within 0.013 mm per 25.4 mm (0.0005 inch per 1 inch) shaft diameter. Note:

Strany 5 - 5 Piping and Control System

4.10 Disengage setting plates and store separately. 4.11 Inspect equipment and driver alignment in accordance with coupling and/or equipme

Strany 6

 5.3 Sizepipingsystemforrequiredowrates.Minimizerestrictionsand  determine total pressure drop(s) through piping system to ensure

Strany 7 - 8 Repairs and Guarantee

7 Off-SitePerformanceTesting 7.1 Equipment manufacturers will often execute performance tests with   theCircpacHPinstalledonneworretr

Strany 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.To nd your local Flowserve representativeand ﬁnd out more about Flowserve Corporation, visit www.ﬂowserve.comFIS174eng OR

Komentáře k této Příručce

Žádné komentáře

Flowserve Circpac HP Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Flowserve Circpac HP. Flowserve Circpac HP User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Flowserve Circpac HP