Flowserve Valtek Mark One K-Bellows Sealed Globe Valves Uživatelský manuál Strana 1
Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Flowserve Valtek Mark One K-Bellows Sealed Globe Valves. Flowserve Valtek Mark One K-Bellows Sealed Globe Valves User Manual Uživatelská příručka
- Strana / 8
- Tabulka s obsahem
- KNIHY
Shrnutí obsahu
User Instructions Experience In Motion Valtek Mark One K-Bellows Sealed Globe Valves Hydroformed metal bellows seal for extended service life FCD
Valtek Mark One K-bellows 2 1. GENERAL INFORMATION 1.1 Using The following instructions are designed to assist in disassembling, reassembling and t
Valtek Mark One K-bellows 3 3. The user must provide fire protection. 1.7 Spare Parts Use only FLOWSERVE original spare parts. FLOWSERVE cannot acc
Valtek Mark One K-bellows 4 Figure 1: Mark One with K-Bellows Note: Item numbers correspond directly to the valve's bill of material.
Valtek Mark One K-bellows 5 bolting. Once the yoke clamps are off remove the air from the actuator. This will cause the yoke and bonnet to separat
Valtek Mark One K-bellows 6 3.4 If the packing has been removed, replace packing spacer, packing and upper stem guide (refer to Figure 1). 3.5 Ins
Valtek Mark One K-bellows 7 the plug to the mid-stroke position and proceed to tighten. WARNING: Failure to return the plug to the mid-stroke positi
Experience In Motion Regional Headquarters Flowserve America 1350 N. Mt. Springs Prkwy. Springville, UT 84663 USA Telephone: +1 801 489 8611 Fax: +
Související produkty a manuály pro Hardware Flowserve Valtek Mark One K-Bellows Sealed Globe Valves
(106 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.072 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce