Flowserve ISC1EX Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Flowserve ISC1EX. Flowserve ISC1EX User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Repair Instructions
ISC
Flow Solutions Division
ISC1EX
Single Elastomer Bellows
Zobrazit stránku 0
1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Repair Instructions

Repair InstructionsISCFlow Solutions DivisionISC1EXSingle Elastomer Bellows

Strany 2 - 1 Nomenclature

2 DisassemblyWhen disassembling seal, inspect for conditions which may have caused theneed for the seal to be removed from service. If seal was remove

Strany 3 - Required surface finish

3.2 Gland Assembly 1 (Figure 2)A Mating ring O-ring surface - Inspect for wear,fretting, nicks, scratches, or corrosion.Required surface finish: 6

Strany 4 - 4 Seal Assembly Instructions

44 Seal Assembly Instructions4.1 Tools Required•3/32", 1/8" hex key wrenches (Sizes < 2.625"); 1/8", 3/16" hex keywrenches

Strany 5

54.5 Align the two flats on themating ring 3 with the twoflats on the inside of thegland drive ring in thegland assembly, and pressthe mating ring i

Strany 6 - Centering

64.9 Place the gland/matingring assembly face downover the sleeve/rotary unitassembly. Do not com-press. (Figure 9)4.10 Place the sleeve collar 9onto

Strany 7 - 5 Static Testing

76 Installation6.1 Refer to the ISC Installation Instructions, FIS120, for proper seal installation. 3 Trademark of Minnesota Mining and Manufacturing

Strany 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.FIS142ORIG 03/01 USAFlowserve Corporation Flow Solutions DivisionPrinted in U.S.A.ISO 9000CertifiedGermanyBrazilMexicoKala

Komentáře k této Příručce

Žádné komentáře