Flowserve MX HART Field Unit Uživatelský manuál stáhnout pdf (Strana 43)

MX/QX HART Field Unit FCD LMENIM2340-00 – 1/14

ﬂowserve.com

The Energize/De-Energize Relays command will allow the customer to set the state of the relays if and only if the relay

is conﬁgured for “Network Control”. When these commands are selected a new window will open, allowing the user to

select which relays to energize (those with a check in the check box will be energized, those with no check in the check

box will

be de-energized).

3.7 Calibration

3.7.1 Loop Current Trim Procedure

The Loop Current may be calibrated from the DD menu Device Setup->Wired HART Board->Calibration as follows:

Click on the Loop Current Analog Input button. You will receive a warning that changing the calibration may

cause the unit to move.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Žádné komentáře

Flowserve MX HART Field Unit Uživatelský manuál Strana 43