Flowserve MX Limitorque Uživatelský manuál stáhnout pdf (Strana 105)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

ﬂowserve.com

STEP 7

Remove the control module assembly from

actuator housing (leave 20-pin ribbon cable

connected to control module boards). Take

control module assembly to work area to

perform maintenance as required.

If control module assembly return is required

for repair/replacement, remove the CP board

from inside the CP cover as follows:

Integral

Controls

Assembly

STEP 8

Using a 3 mm hex key, remove the four M4

screws (#8-25) that retain the CP board inside

the CP cover.

8-25

STEP 9

Lift the CP board out of the CP cover.

(See Section 5.2.3 for fuse replacement.)

(See Section 5.2.4 for control module return

options.)

(See Section 5.2.5 for EPROM care and

replacement.)

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 163 164

Žádné komentáře

Flowserve MX Limitorque Uživatelský manuál Strana 105