Flowserve MX Limitorque Uživatelský manuál Strana 137
- Strana / 164
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
129
Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08
flowserve.com
STEP 4
Disconnect the three terminal block wires from l1, l2 and l3 on reverser as shown by loosening the
reverser screws.
Remove the 19 amp controls assembly (1-19) by loosening the three M4 mounting plate screws
(8-7) and slightly rotating the controls assembly counterclockwise (CCW) direction until the keyhole
slots in the baseplate allow the heads of the screws to pass through the baseplate.
Disconnect the two 2-pin white connectors from the lead seal.
STEP 5
Remove the 19 amp controls assembly (1-19)
by loosening the three M4 mounting plate
screws (8-7) and slightly rotating the controls
assembly counterclockwise (CCW) direction
until the keyhole slots in the baseplate
allow the heads of the screws to pass through
the baseplate.
Disconnect the two 2-pin white connectors
from the lead seal.
1-19
8-7
5
5.12.2 Remounting
Remount 19 amp power assembly by reversing the steps for removal.
5.13 Encoder (Through hole and surface mount
technology, most units prior to September 2007)
Table 5.10 – Encoder Parts List
Part Number Description Qty.
1-6 Encoder assembly 1
1-36 Socket head cap screw (M4x16) 3
6-11 Input gear, 78-tooth (ID 3 through 8) 1
6-24 Input gear, 69-tooth (ID 1 or 2) 1
- USER INSTRUCTIONS 1
- Contents 3
- Introduction 9
- 1.4 Reference Documents 10
- MX Actuator Subassembly 11
- 2.1.1 Product Description 12
- 2.1.2 Storage 12
- 2.2 Product Identification 13
- 2.3 Maintenance 14
- 2.4 Subassembly Removal 16
- 2.5.2 Return Procedure 17
- Remove Actuator 19
- Base (Thrust) 22
- Mechanical Assemblies 27
- 4.1.1 Removal 28
- 4.1.2 Remounting 29
- (40 RPM and greater) 30
- 4.1.4 Remounting 31
- 4.2 Declutch 33
- 4.2.1 Removal 35
- Oil Plug Drains 36
- 4.2.2 Remounting 37
- 1-10 Wave spring (1) 40
- 1-8 Handwheel (1) 40
- 4.3.1 Removal 41
- 4.3.2 Remounting 41
- (MX-85, -140, and -150) 44
- 4.4.4 Remounting 47
- 4.5.2 Removal of Handwheel 50
- 4.5.3 Removal 50
- 4.5.4 Remounting 53
- (MX-10, -20, and -40) 58
- 4.7 Thrust Base Type A1/A1E 61
- 4.7.1 Removal 64
- 4.7.2 Remounting 64
- 4.8 Torque Base Type B1 65
- 4.8.1 Removal 66
- 4.8.2 Remounting 66
- 4.9 Baseplate Type B4 67
- 4.9.1 Removal 68
- 4.9.2 Remounting 70
- 4.10 Worm Shaft 71
- 4.10.1 Removal 72
- 4.10.2 Remounting 73
- 4.11.1 Removal 76
- Lubricate 77
- 4.12.1 Removal 79
- Lubricate areas between 81
- 8BWF4QSJOH 85
- 4.13.1 Removal 86
- 4.13.2 Remounting 87
- -140, and -150) 89
- Handwheel Worm Gear 91
- Adapter (12-1) 91
- Handwheel Adapter 91
- 4.14.2 Remounting 92
- 4.15.1 Removal 96
- 4.15.2 Remounting 97
- Electronic Assemblies 101
- September 2003) 102
- 5.2.1 Removal 103
- flowserve.com 105
- 5.2.2 Remounting 106
- 5.2.3 Fuse Replacement 109
- &130 110
- 5.2.5.2 EPROM Removal 112
- 5.2.5.3 EPROM Installation 112
- 5.3.1 Installation 113
- 5.3.2 Removal 116
- 5.3.3 Fuse Replacement 116
- 5.4.1 Installation 117
- 5.4.2 Removal 118
- 5.5.1 Installation 119
- 5.5.2 Removal 122
- 5.8.1 Removal 124
- 5.8.2 Remounting 126
- Actuators Since March 2007) 128
- 5.10.1 Removal 130
- 5.10.2 Remounting 131
- After September 2007 136
- 5.12.2 Remounting 137
- 5.13.1 Removal 138
- 5.13.2 Remounting 140
- September 2007) 141
- 5.14.1 Removal 142
- 5.14.2 Remounting 143
- 5.15.1 Removal 145
- 5.15.2 Remounting 145
- Part Number Description Qty 146
- 5.16.1 Removal 147
- 5.16.2 Remounting 148
- 5.17.1 Removal 149
- 5.17.2 Remounting 150
- 5.18.1 Disassembly Procedure 152
- 5.18.2 Assembly Procedure 153
- BLOCK PLUG 154
- Spare and Replacement Parts 158
- 6.1.3 Critical Components 159
- 6.2.2 Short-Term Duty 159
- 6.2.3 Long-Term Duty 159
- 6.3 Other Concerns 160
- Regulatory Information 162
Související produkty a manuály pro Hardware Flowserve MX Limitorque
Hardware Flowserve BUSwitch Uživatelský manuál
(16 stránky)
(16 stránky)
Hardware Flowserve Electric Actuator for use with Fail Safe Uninterru Uživatelský manuál
(2 stránky)
(2 stránky)
Hardware Flowserve Handwheels Uživatelský manuál
(12 stránky)
(12 stránky)
Hardware Flowserve B320 Series Uživatelský manuál
(34 stránky)
(34 stránky)
Hardware Flowserve L120 Series Uživatelský manuál
(40 stránky)
(40 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.035 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce