Flowserve NM Uživatelský manuál stáhnout pdf (Strana 11)

NM USER INSTRUCTIONS ENGLISH 71576289 - 11/09

Page 11 of 48

2.2.2 Pump masses

All masses are in kg:

MASS OF BARE SHAFT PUMPS ACCORDING TO STAGE NUMBER

PUMP TYPES

2 3 4 5 6 7 8 9 10 11 12

32 NM 45 50 55 60 65 70 75 80 85 90 95

40 NM 56 65 74 83 92 101 110 119 128

50 NM 82 92 102 112 122 132 142 152

65 NM 111 123 135 147 159 171 183

80 NM 146 165 184 203 222 241

100 NM 245 285 325 365 405 445 485 525

125 NM 466 509 552 595 638 681 724 767 810

150 NM 646 756 864 973 1082 1191 1300 1409 1518 1627 1736

200 NM 1048 1190 1332 1474 1616 1758 1900 2042 2184 2326

201 NM 1300 1500 1700 1900 2100

102 NM 250 289 328 367 406 445 484 523 562

122 NM 575 650 725 800 875

152 NM 820 940 1060 1180 1300

202 NM 1000 1200 1400 1600

252 NM 1800 2120 2440 2760

352 NM 3900 4475 5050

All motors (for masses see the motor

description plate) must be handled with a winch.

For masses above 25 kg (55 lb), manual

handling is forbidden.

2.3 Lifting

2.3.1 Slinging of motor pumps units

Use handling means in accordance with

motor pump unit mass mentioned on the CE plate.

For the masses of the pumps bare end of shaft

see table § 2.2.2 and nameplate.

To avoid distortion, the pump unit

should be lifted as shown.

A crane must be used for all pump sets in

excess of 25kg (55 Ib). Fully trained personnel

must carry out lifting, in accordance with local

regulations.

Motor pump unit

Bareshaft pump

When handling always wear gloves, safety

boots and an industrial safety helmet.

For masses above 25 kg (55 lb), manual

handling is forbidden.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Flowserve NM Uživatelský manuál Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Čerpadla Flowserve NM