Flowserve Pac-Seal Type 21 Uživatelský manuál stáhnout pdf

Shrnutí obsahu

Installation InstructionsPac-Seal Type 21 and Type 31 Mechanical Shaft SealTM Experience In Motion

2Description Pac-Seal Types 21 and 31 feature uniquely designed crimped heads and hex-torque drive systems that provide a solid engineered advantage o

Strany 3 - 1 Equipment Check

3Seal Chamber Requirements Figure 2Sleeve or shaft finish to be1.6 μm (63 μinch) R or betteraShaft or sleeve OD-0.050 mm (-0.002 inch

Strany 4

1.5 Thoroughly inspect and clean the seal chamber and shaft or pump sleeve. Inspect for corrosion or any defects. Remove all burrs, cuts, dents or de

Strany 5

52.4 Lubricate inner diameter (ID) of the rotating seal head elastomer bellows with Pac-Ease. Note: For smaller diameter seals it may be easier to l

Strany 6

63 Type 21 and Type 31 Operational Recommendations 3.1 Remove lock outs on equipment and valves. 3.2 Do not start up the pump dry to check motor

Strany 7

7

Strany 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.FIS217eng ORG 04/13 Printed in USAflowserve.comTo ﬁnd your local Flowserve representativeand ﬁnd out more about Flowserve

Příbuzné modely Pac-Seal Type 31

Komentáře k této Příručce

Žádné komentáře

Flowserve Pac-Seal Type 21 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Flowserve Pac-Seal Type 21. Flowserve Pac-Seal Type 21 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely Pac-Seal Type 31

Komentáře k této Příručce

Související produkty a manuály pro Hardware Flowserve Pac-Seal Type 21